ネタ | What is the Atomstack P9 M50 ?道場 | アニメ・漫画 | まにあ道

The assembly is very simple, about 10-20 minutes,

Learn to install:

1. You can scan the QR code on page 8 of the assembly instructions to download the user instructions.

2. You can download it directly from the ""Installation Manual and User Guide"" on this page.

3. You can go to the website to search "ATOMSTACK A5 Pro" , watch related videos.

Q: Can I cut metal? What are the specifications? A: You can engrave stainless steel and aluminum oxide. If you paint the metal surface black before engraving, the engraving effect will be better, because the unpainted metal surface will reflect light and reflect a large part of the laser energy.

Q: On the X-axis the laser doesn't travel smoothly, resulting in jittering in the product being cut.

A: Hello, the X axis does not move smoothly, and the structure is loose or too tight to cause movement. Please check the structure and the eccentric nut for looseness, over tightening and deviation (please click on the page video "Check that the X axis does not move smoothly" "operate)

When operating the laser engraver, please install the laser protective cover; if it is not installed, you need to wear goggles.

●Do not touch the laser with your hands, otherwise you may burn your hands.

●Please avoid strong impact on the machine.

●It is forbidden for children under 14 years old to use this product. Children over 14 years old need adult supervision.

●Do not apply the laser directly to any specular reflection object, which may cause injury to the operator or burn the laser.