High-quality MSI S93-0403250-D04 Laptop AC Adapter replacement

道場TOP ネタ一覧 ukbattery道場

High-quality MSI S93-0403250-D04 Laptop AC Adapter replacement

◇評価 0ポイント; ◇閲覧回数 271回
◇登録日: 2023年1月27日

: ukbattery; 道場主

Lv.25

Wholesale and retail laptop AC Adapters MSI S93-0403250-D04 Laptop AC Adapter 19V--6.32A(19.5V 6.15A/6.3A), 120W. Replace the new charger for MSI Pro 20T 6M-015XEU. Order online on uk-online.co.uk and Fast Delivery! MSI S93-0403250-D04 adapter

SPECIFICATIONS

Input: AC 100V - 240V 2A 50-60Hz(for
Output: 19V--6.32A(19.5V 6.15A/6.3A), 120W
P/N
ADP-120RH_D, 0432-037H000635000055, B27W68Y001N,
ADP-120ZB_AB, A12-120P1A, A120A010L-MD03,
S93-0403350-C54, ADP-120MH_D, S93-0403250-D04
Compatible Models

Maintenance and instructions for the MSI S93-0403250-D04 Laptop AC Adapter:

1. Wiring is exposed. If the cable is worn in any way, this may result in some internal cable exposure. If the cable is severely worn and the cable is exposed, the adapter should be stopped.

2. The cable is broken. A cable break may occur in the flexible connector near the adapter module or connector. These flexible joints are used to bend the cable when the adapter module is wound, but may become brittle over time, causing breakage. If the cable hits the edge of an object such as a table or stool, it may also break.

3. The stitches are bent or broken. If the computer port is not properly inserted, the adapter pins may bend or break completely. Unplugging or inserting the cable at an angle may cause the center pin of the adapter to bend. If this happens frequently, the pins may break and the adapter will stop working.

4. The cable is loose. If your cable is loose, try unplugging the cable and reconnecting it to make sure it is in place. If the cable is still loose, check for broken or broken pins or connectors or cables. If the cable is damaged and it is loose, you must replace the adapter or cable.

5. The cable is worn. Cable wear is most likely to occur at either end of the cable connecting the adapter module to the connector that connects to the computer. This may be due to the number of times the cable wraps around the adapter module or the cable is subjected to any unnecessary stress.