adapter for Fortinet FG-50E FG-30E FG-90D

◇評価 0ポイント; ◇閲覧回数 443回
◇登録日: 2022年12月6日

: sparrow11; 道場主

Lv.24

Buy New Replacement FSP036-RBBN2 adapter, Power Cord included. Works for Fortinet FG-50E FG-30E FG-90D and many more. Warranty & Fast Shipping. We are the real manufacturer for FORTINET FSP036-RBBN2 adapter ,and we believe that our products are your best choose.

Brand : FORTINET
Alternate with the following models : FSP036-RBBN2
Cell technology : GSB400
Product color : Black
Capacity : 100-240Vac.1.5A 50-60Hz
Voltage : 12V 3A 36W
Product dimensions : 2Pin with pin inside(ref to the picture)
Encoding : FOR17845_1

Online Store:

Maintenance and instructions for the FORTINET FSP036-RBBN2 adapter:

1. Wiring is exposed. If the cable is worn in any way, this may result in some internal cable exposure. If the cable is severely worn and the cable is exposed, the adapter should be stopped.

The cable is broken. A cable break may occur in the flexible connector near the adapter module or connector. These flexible joints are used to bend the cable when the adapter module is wound, but may become brittle over time, causing breakage. If the cable hits the edge of an object such as a table or stool, it may also break.

2. The stitches are bent or broken. If the computer port is not properly inserted, the adapter pins may bend or break completely. Unplugging or inserting the cable at an angle may cause the center pin of the adapter to bend. If this happens frequently, the pins may break and the adapter will stop working.

3. The cable is loose. If your cable is loose, try unplugging the cable and reconnecting it to make sure it is in place. If the cable is still loose, check for broken or broken pins or connectors or cables. If the cable is damaged and it is loose, you must replace the adapter or cable.

4. The cable is worn. Cable wear is most likely to occur at either end of the cable connecting the adapter module to the connector that connects to the computer. This may be due to the number of times the cable wraps around the adapter module or the cable is subjected to any unnecessary stress.