High-quality
ACER ADP-18TB Laptop AC Adapter. Works for Acer Iconia Tab W3 W3-810 Tablet Ac Adapter Charger Plug ADP-18TB. This Brand New
ACER ADP-18TB Replacement Servers Power Supply Cord uses internal safety control system to limit output voltage or current to protect against overload and short circuit malfunction. This Computer Power Supply is also certified by CE and RoHS to ensure both safety and stability for your device.
SPECIFICATIONS
Input: 100-240V 50-60Hz 1.2A(1,2A)
Output: 12V 1.5A(1,5A) Max 18W
P/N
DC Connector: 3.0*1.1MM
Please make sure the DC OUTPUT (12V 1.5A)of ac adapter & Connector size(3.0*1.1mm) are accordant before you bid!
Package Content: 1x AC Adapter, with one free wall plug (UK / EU / AU / US fits for your country)
KP.01801.005, AP.01801.001, HU10104-11295, 2-515-5305, R33030, ADP-18TB.
Maintenance and instructions for the ACER ADP-18TB Laptop AC Adapter:
1. Wiring is exposed. If the cable is worn in any way, this may result in some internal cable exposure. If the cable is severely worn and the cable is exposed, the adapter should be stopped.
2. The cable is broken. A cable break may occur in the flexible connector near the adapter module or connector. These flexible joints are used to bend the cable when the adapter module is wound, but may become brittle over time, causing breakage. If the cable hits the edge of an object such as a table or stool, it may also break.
3. The stitches are bent or broken. If the computer port is not properly inserted, the adapter pins may bend or break completely. Unplugging or inserting the cable at an angle may cause the center pin of the adapter to bend. If this happens frequently, the pins may break and the adapter will stop working.
4. The cable is loose. If your cable is loose, try unplugging the cable and reconnecting it to make sure it is in place. If the cable is still loose, check for broken or broken pins or connectors or cables. If the cable is damaged and it is loose, you must replace the adapter or cable.
5. The cable is worn. Cable wear is most likely to occur at either end of the cable connecting the adapter module to the connector that connects to the computer. This may be due to the number of times the cable wraps around the adapter module or the cable is subjected to any unnecessary stress.
ADP-18TB power supply
Related Products:
コメントはまだありません。