Buy new replacement parts XPG FSP230-AJAN3 adapter

◇評価 0ポイント; ◇閲覧回数 794回
◇登録日: 2021年12月6日

: sparrow11; 道場主

Lv.24

Buy New Replacement FSP230-AJAN3 adapter, Power Cord included. Works for XPG XENIA 15, XPG ADATA XENIA1660 XENIA2070 and many more. Warranty & Fast Shipping. We are the real manufacturer for XPG FSP230-AJAN3 adapter ,and we believe that our products are your best choose.

Brand : XPG
Alternate with the following models : FSP230-AJAN3
Cell technology : GSB498
Product color : Black
Capacity : 100V-240V 3A 50-60Hz
Voltage : 19.5V 11.79A 230W
Product dimensions : 5.5*2.5mm
Encoding : MSI17389

Online Store:

JP: XPG FSP230-AJAN3 アダプター

Maintenance and instructions for the XPG FSP230-AJAN3 adapter:

1. Wiring is exposed. If the cable is worn in any way, this may result in some internal cable exposure. If the cable is severely worn and the cable is exposed, the adapter should be stopped.

The cable is broken. A cable break may occur in the flexible connector near the adapter module or connector. These flexible joints are used to bend the cable when the adapter module is wound, but may become brittle over time, causing breakage. If the cable hits the edge of an object such as a table or stool, it may also break.

2. The stitches are bent or broken. If the computer port is not properly inserted, the adapter pins may bend or break completely. Unplugging or inserting the cable at an angle may cause the center pin of the adapter to bend. If this happens frequently, the pins may break and the adapter will stop working.

3. The cable is loose. If your cable is loose, try unplugging the cable and reconnecting it to make sure it is in place. If the cable is still loose, check for broken or broken pins or connectors or cables. If the cable is damaged and it is loose, you must replace the adapter or cable.

4. The cable is worn. Cable wear is most likely to occur at either end of the cable connecting the adapter module to the connector that connects to the computer. This may be due to the number of times the cable wraps around the adapter module or the cable is subjected to any unnecessary stress.