JBL F13V-2.2C-DC adapter Replacement

道場TOP ネタ一覧 https://www.pc-laptop.co/道場

JBL F13V-2.2C-DC adapter Replacement

◇評価 0ポイント; ◇閲覧回数 3回
◇登録日: 2025年7月9日

: sparrow11; 道場主

Lv.24

Buy New Replacement JBL F13V-2.2C-DC adapter, Power Cord included. Works for JBL Horizon 2 Bluetooth Speaker and many more. Warranty & Fast Shipping. We are the real manufacturer for JBL F13V-2.2C-DC adapter ,and we believe that our products are your best choose.

Brand : JBL Adapter
Type : GSB560
Capacity : 100-240V 50-60Hz (for worldwide use)
Voltage : 13V 2.2A, 28.6W
Encoding : JBL17685

F13V-2.2C-DC Alternate with the following models：

F13V-2.2C-DC

The product JBL F13V-2.2C-DC is perfectly compatible with the product model JBL Horizon 2 Bluetooth Speaker :

F13V-2.2C-DC 13V 2.2A AC/DC Adapter for JBL Horizon 2 Bluetooth Speaker

INPUT: 100-240V 50-60Hz (for worldwide use)
OUTPUT: 13V 2.2A, 28.6W
Connector size: 4.0 mm * 1.7 mm
Warranty: 12 months
Cord Cable: Only US plug(Please note for other plugs)
Part Numbers: F13V-2.2C-DC
Compatible Models :
For JBL Horizon 2 Bluetooth Speaker

oline store:
ES : Elija la batería de JBL F13V-2.2C-DC adecuada
FR : Adaptateur pour ordinateur portable Premium JBL F13V-2.2C-DC
PL : Kup JBL F13V-2.2C-DC adapter do laptopa
US : JBL F13V-2.2C-DC laptop adapter replacement

http://pc-laptop.co/jbl-power_supply-F13V-2.2C-DC-p188799.htm

Maintenance and instructions for the JBL F13V-2.2C-DC adapter:

1. Wiring is exposed. If the cable is worn in any way, this may result in some internal cable exposure. If the cable is severely worn and the cable is exposed, the adapter should be stopped.
2. The cable is broken. A cable break may occur in the flexible connector near the adapter module or connector. These flexible joints are used to bend the cable when the adapter module is wound, but may become brittle over time, causing breakage. If the cable hits the edge of an object such as a table or stool, it may also break.
3. The stitches are bent or broken. If the computer port is not properly inserted, the adapter pins may bend or break completely. Unplugging or inserting the cable at an angle may cause the center pin of the adapter to bend. If this happens frequently, the pins may break and the adapter will stop working.
4. The cable is loose. If your cable is loose, try unplugging the cable and reconnecting it to make sure it is in place. If the cable is still loose, check for broken or broken pins or connectors or cables. If the cable is damaged and it is loose, you must replace the adapter or cable.
5. The cable is worn. Cable wear is most likely to occur at either end of the cable connecting the adapter module to the connector that connects to the computer. This may be due to the number of times the cable wraps around the adapter module or the cable is subjected to any unnecessary stress.